About this item

【***NOTE】The ADX73550621 French Door Refrigerator Door gaskets will be creased when placed in the box. Therefore, the first thing to do after receiving the gasket is to repair the crease. Recommended methods: 1) Lay the gasket flat side down in the sun for 3 hours; 2) Soak in 80°C hot water for 1 hour and allow to dry thoroughly; 3) Use a hair dryer or heat gun to gently heat the crease to repair it. Don't worry, this is thermal expansion and contraction and will not affect the gasket's quality.
➽【Part ADX73550621 Refrigerator Freezer Door Seal Specification】LXun thicken ADX73550621 refrigerator door gasket replacement measures approximately 39.35 * 16.93 inches（100cm*43.5cm including the soft edges）, This GRAY ADX73550621 refrigerator door gasket part for Kenmore is designed to replace the old Kenmore LG Bottom-Mount Refrigerator door gasket and for LG 22.4 Cu. Ft. Bottom Freezer Refrigerator and 25.6 Cu. Ft. Side-By-Side Built-In Refrigerator parts, which can solve the problems of your old kenmore refrigerator leakage, cold air leakage, refrigerator inner wall iced, etc., and extend the service life of your refrigerator
➽【LXun Refrigerator Door Gasket Broad Compatibility】ADX73550621 refrigerator door gasket replacement kit compatible with Kenmore, LG, Kenmore Elite French Door Refrigerator fresh food left side door gasket, Part ADX73550621 refrigerator door seal replaces part numbers as ADX73550621 ADX72930401 ADX72930421 2702198 AP5783538 PS8749108 EAP8749108 3561710 PD00034264 freezer door seal parts for kenmore refrigerator door gasket. kenmore refrigerator door freezer gasket seal replacement part ADX73550621 refrigerator seal fit for kenmore Bottom-Mount Refrigerator
➽【High Quality EPDM Rubber】LXun ADX73550621 fridge door seal is made to lasting, LXun ADX73550621 refrigerator freezer door gasket Seal parts is made of high quality EPDM rubber for kenmore refrigerator door is very durable and resiliently. The LG ADX73550621 refrigerator door gasket seal replacement part internal magnetic strip is thickened and strengthened. Enhanced magnetic about 815GS , better adhering to the refrigerator door gasket
➽【Easy to Install】①Heating ADX73550621 door gasket until the surface is flat and free of wrinkles and kinks; ②Remove the old maytag refrigerator door gasket and clean the door frame;③Install the new seal, first fix the four corners, and then press the four sides in turn;④If there are still some wrinkles after installation, you can use a hair dryer to heat the creases at low temperature, be careful not to burn yourself;⑤Use tape to fix the refrigerator door for 24 hours (optional)